NOLITA

Inlay Blank - Mother of Pearl 1.25mm - 50mm x 30mm - For Guitar/Luthier

Description: Mother of Pearl blank for cutting custom inlays - 1.25mm (0.050") thick - 50mm x 30mm - approximately 1/5 ounce - Premium quality - Natural shell White Mother of Pearl is the most common inlay material for the fingerboards of guitars and other stringed instruments. It has a white or light silver colour with a natural iridescence and a subtle beauty. 1.25mm thick stock is good for both fingerboard and headstock inlays. Thicker material is better for fingerboard inlays as the radius of the fingerboard will not make the edges too thin. The blanks can be cut to shape using a jewellers saw. The inlays should be installed into a cavity made by routing or chiseling. Always wear a dust mask when sanding and cutting pearl as the dust may be hazardous if inhaled. White Mother of Pearl blank to cut custom fingerboards and headstock inlays. The best way to cut these blanks into inlays is using a jewellers saw. The blades in these saws are much finer than any other saw and will cut the shell without breaking it and leave a clean edge that needs little smoothing out. A cavity needs to be made in the timber for the inlays to be installed in. The best way to create this is with a Dremel router and small downcut bit. If a Dremel isn't available the cavity can be made with a small sharp chisel. The inlays should be set in using epoxy with some sanding dust mixed into it. The sanding dust should be the from the timber being inlaid. Once the epoxy has dried level the inlay to the timber using a hard sanding block or fingerboard radius block with sandpaper attached with double-sided tape. This hard block will help keep the surface level.

Price: 29.1 AUD

Location: Mount Tamborine, Queensland

End Time: 2024-09-14T20:59:42.000Z

Shipping Cost: 29.87 AUD

Product Images

Inlay Blank - Mother of Pearl 1.25mm - 50mm x 30mm - For Guitar/LuthierInlay Blank - Mother of Pearl 1.25mm - 50mm x 30mm - For Guitar/LuthierInlay Blank - Mother of Pearl 1.25mm - 50mm x 30mm - For Guitar/LuthierInlay Blank - Mother of Pearl 1.25mm - 50mm x 30mm - For Guitar/Luthier

Item Specifics

Return shipping will be paid by: Buyer

Returns Accepted: Returns Accepted

Item must be returned within: 30 Days

Instrument: Guitar

Brand: Australian Luthiers Supplies

MPN: Does Not Apply

Suitable For: Acoustic Electric Guitar, Acoustic Guitar, Bass Guitar, Cigar Box Guitar, Classical Guitar, Electric Guitar

Recommended

Australian Silky Oak Electric Guitar Body Blank #214 - 1-Piece - 2nd Grade
Australian Silky Oak Electric Guitar Body Blank #214 - 1-Piece - 2nd Grade

$201.87

View Details
Fret Dressing Kit
Fret Dressing Kit

$168.14

View Details
Luthier Tools Value Bundle #2
Luthier Tools Value Bundle #2

$322.79

View Details
Herringbone Rosette for Acoustic Guitar
Herringbone Rosette for Acoustic Guitar

$16.40

View Details
Fret Slotting Mitre Box & Saw for Guitar Maker/Luthier
Fret Slotting Mitre Box & Saw for Guitar Maker/Luthier

$208.65

View Details
Bold 3-Piece Herringbone Acoustic Guitar Rosette
Bold 3-Piece Herringbone Acoustic Guitar Rosette

$42.82

View Details
Luthier Tools Value Bundle #3
Luthier Tools Value Bundle #3

$431.58

View Details
Fret Slotting Mitre Box & Saw for Guitar Maker/Luthier
Fret Slotting Mitre Box & Saw for Guitar Maker/Luthier

$208.65

View Details
Fret Dressing Kit
Fret Dressing Kit

$168.14

View Details
Gotoh Banjo Tuners (Bonus ALS Fret Polishing Kit) SPBJ4-AIN Model by...
Gotoh Banjo Tuners (Bonus ALS Fret Polishing Kit) SPBJ4-AIN Model by...

$194.72

View Details