Ultrasonic Leak Detector Transmitter Locator Air Water Dust Tester + Headphone

Description: Basic Introduction The leak detection tool adopts advanced ultrasonic sensor technology, which can detect and locate the sealing conditions or leak points of scenes such as automobile air conditioning compression system, water tank sealing space, automobile brake system and storage tank; according to the actual detection requirements, the leak detection The tool is equipped with 2 working modes (active mode and passive mode), and the sensitivity and response frequency of the detection tool can be adjusted. It is a quick, accurate and easy-to-use inspection tool. Working Principle When gas or air passes through a small hole, turbulence is generated, and the turbulence generates ultrasonic waves. Therefore, when air leaks into the vacuum easily or the pressure vessel leaks into the outside air, ultrasonic waves with strong directivity are generated. This directionality of ultrasonic waves can be used to detect leaks in the sealing system. The frequency of ultrasound is related to the size of the hole through which it passes, but the usual frequency is 40 kHz, so our detection tools can accurately detect leakage. Applicable Scenarios It can detect the sound insulation of automobile/truck windows, automobile air conditioning compression systems, wheels, leaks in water tank sealing spaces, automobile braking systems, bearing systems, bearings and lubrication; liquefied gas tankers, refrigerated vehicles, tankers, cargo Boxes, welding bead doors and other scenes. Package includes: (No battery included)1 x Receiver1 x Transmitter1 x Earphone1 x English Instruction Manual1 x Carrying bag Receiver:Notifications Indication : The "LEAK" LED lights and the "ticking tone" increases in frequencyFrequency Response : 40kHz +/-2kHzOperating Condition:*Temperature : 0~40C*Relative humidity : less than 80 percentBattery : 2 x 9V Battery (Not Including)Size : 192 x 50 x 30mmWeight : about 115gTransmitter:Indicator : LEDOperating Condition :*Temperature : 0 ~ 40C*Relative humidity : less than 80 percentOutput Frequency : 40kHzBattery : 9VLow battery Indication : "POWER"LED can't lightSize : Transmitter :101 x 59 x 28mm /Main Unit ; 192mm x 50mmItem Weight : Transmitter : about 90g (Not including battery) /Main Unit : 115g 2 Working Modes The leak detection tool can use 2 working modes, active mode and passive mode. Among them, the active mode is mainly used to combine EM282-R and EM282-T when there is no ultrasonic wave that can be used for detection in areas where the leaking gas is not pressurized or pressurized sufficiently. Place the EM282-T ultrasonic transmitter in the sealed area and send ultrasonic waves. Scan the outside of the area with EM282-R. After detecting the ultrasonic waves from the sealed area, you can quickly and accurately detect and locate the leakage point; Passive mode can detect and locate leaks in pressure and vacuum systems. In this mode, only EM282-R is required. Adjustable sensitivity and response frequency Adjustable sensitivity, frequency response: 40 kHz±2 kHz, adapt to various degrees of leakage, easy to detect and improve measurement accuracy.

Price: 49.99 USD

Location: Shenzhen,China

End Time: 2024-08-05T21:34:44.000Z

Shipping Cost: 0 USD